Skip to content
SeoulCoslab
Regulations & Compliance

Taiwan Cosmetic PIF and GMP: What a Korean Product Needs

What Taiwan's cosmetic PIF must hold, who signs its safety assessment, how long it is kept, and how Taiwan's GMP rule reaches the Korean factory.

Published November 20, 2026Seoul CoslabLast reviewed November 20, 2026
An open ring binder with blank pages and pastel tab dividers on a pale grey surface, beside a frosted dropper bottle and a white tube

A Taiwan cosmetic PIF is the product information file that the Taiwanese manufacturer or importer must have in place before a cosmetic is supplied in Taiwan. Since 1 July 2026 it covers almost every cosmetic, and Taiwan's GMP rules cover the factories behind them, Korean ones included. Sunscreens, lip and eye products were covered by both from 2024 or 2025.

The PIF and product notification duties come from the Cosmetic Hygiene and Safety Act and fall on the Taiwanese business named on the label. The Korean manufacturer supplies much of the content but does not hold either duty. The GMP rule works differently: it applies to the manufacturing site itself, a Korean one included, and the Taiwanese business shows the site's evidence in the file and the notification. This article goes through the file, the safety signature, storage and the GMP evidence in that order. The overview of the Taiwan route, including labelling and sun care, sits on our page on manufacturing in Korea for the Taiwanese market. This article is orientation rather than a compliance opinion, and the primary sources are listed at the end.

What Is a Cosmetic PIF in Taiwan?

A cosmetic PIF in Taiwan is a dossier of sixteen items, from the full formula to a signed safety assessment, that the Taiwanese manufacturer or importer builds and keeps for each product. Article 4 of the Act puts it next to product notification (登錄): both must be complete before the product is supplied, sold, given away, displayed or offered for trial, and both must be updated when the product changes.

Three things the file is not, according to the Taiwan Food and Drug Administration (TFDA) itself:

  • It is not submitted. Nothing is uploaded to TFDA in advance. The file is kept and produced when the authority inspects it.
  • It is not an approval or a certificate. TFDA describes it as neither certification, prior review, approval nor a filing for the record, and there is no mark or certificate that comes with it.
  • It is not the contract manufacturer's duty. TFDA's PIF FAQ says that a contract manufacturer is not one of the parties required to establish the file. The duty sits with the business that places the product in Taiwan.

That last point matches how a product information file works elsewhere. As our article on what Korean cosmetics export documents prove puts it, the file is held by a party in the destination market, and the manufacturer supplies a large part of what goes into it.

When Did the PIF and GMP Rules Take Effect?

Both rules took effect in three phases, on 1 July 2024, 1 July 2025 and 1 July 2026, with the same product groups in each phase, under two Ministry of Health and Welfare notices published in June 2024. As of November 2026, all three phases are in force.

PhaseProduct groupsPIF required fromManufacturing sites must meet GMP from
1Sunscreens, hair dyes, perm products, antiperspirants and deodorants, and home-use tooth whitening products containing peroxide1 July 20241 July 2024
2Baby products, lip products, eye products, and non-medicated toothpaste and mouthwash1 July 20251 July 2025
3All other cosmetics, except handmade solid soaps from producers exempt from factory registration1 July 20261 July 2026

Phase 1 also covers products with one of those uses that contain an ingredient not on the list attached to the notice, where the EU, the United States and Japan have published rules for that ingredient. This matches how our Taiwan market page describes sun protection filters.

For a Korean range, the table reads like this. A Korean sunscreen, lip product or eye product has been covered by both rules since 2024 or 2025. A toner, cream or body lotion came in on 1 July 2026. "GMP only started reaching foreign factories in 2026" is true only for that last group.

The 16 Items in a Taiwan PIF

Article 3 of the PIF Regulations lists sixteen items. The table gives each one and the side of the project its content usually comes from. The legal holder of the whole file is still the Taiwanese manufacturer or importer.

#ItemContent usually comes from
1Basic product data: name, category, dosage form, use, names and addresses of manufacturing sites, manufacturer or importer detailsTaiwanese importer, with site details from the Korean manufacturer
2Proof that product notification is completeTaiwanese importer
3Full ingredient names and the content of eachKorean manufacturer
4Label, leaflet, outer packaging or containerBrand and Taiwanese importer
5GMP certificate or declaration for the manufacturing siteKorean manufacturer
6Manufacturing method and processKorean manufacturer
7Directions: method, body area, amount, frequency and target usersBrand and Korean manufacturer
8Adverse reaction data for the productBrand and Taiwanese importer
9Physical and chemical properties of the product and each ingredientKorean manufacturer and raw material suppliers
10Toxicological data on the ingredientsRaw material suppliers and the safety assessor
11Stability test reportKorean manufacturer or its test laboratory
12Microbiological test reportKorean manufacturer or its test laboratory
13Preservative efficacy test reportKorean manufacturer or its test laboratory
14Evidence supporting the product's functional claimsBrand, with test reports
15Data on packaging materials in contact with the productPackaging supplier, via the Korean manufacturer
16Safety assessment conclusion signed and dated by the safety assessor, with the assessor's qualificationsSafety assessor

Four rules in the same article change how the table is used:

  • Language. The file is built in Chinese or English. Source documents in any other language, Korean included, need a Chinese or English translation. TFDA's 2026 FAQ accepts translations made with AI tools, provided the business checks them.
  • Items 11 to 13 can be omitted, with reasons. Where the safety assessor judges from the product's nature that stability, microbiological or preservative efficacy data are not needed, and states the reasons in item 16, those items need not be included. The assessor decides this product by product. It is not a general exemption.
  • Several sites, all listed. If the product is made in stages at more than one site, item 1 lists every site and what each one does.
  • Changes update the file. When any item changes, the file is updated.

TFDA's FAQ adds two points a Korean project can use. Data in a product information file that the overseas original manufacturer has already prepared can be reused where it meets Taiwan's rules. And test reports do not have to come from a laboratory in Taiwan or from an accredited laboratory, although the microbiological report has to be read against Taiwan's own microbial limit table. Which tests a launch needs in Korea and elsewhere is set out in our overview of cosmetic quality testing before launch. How stability and preservative efficacy testing work is covered in our guide to cosmetic stability testing and our guide to choosing a preservative system.

Who Can Sign the Safety Assessment?

The safety assessor (安全資料簽署人員) can be anyone, in Taiwan or abroad, who meets the education and training conditions in Articles 4 and 5 of the PIF Regulations. It is not a licence: TFDA says there is no licence or certification to obtain, although the file holds proof of the assessor's degree and training (item 16).

The conditions are:

  • A degree in medicine, pharmacy, toxicology, cosmetic science or a related field from a recognised university in Taiwan or abroad. A chemistry or chemical engineering graduate qualifies if they graduated before 30 June 2019 and have at least five years of relevant safety assessment experience.
  • Initial training in four subjects, each with its own minimum: cosmetic regulations (at least 4 hours), ingredient applications and risks (at least 8 hours), safety assessment methods (at least 36 hours) and concluding the assessment (at least 6 hours). The courses must be given by a university in Taiwan or abroad that meets Taiwan's recognition rules, or by the central competent authority.
  • Annual training of at least eight hours on the same subjects, from the same kinds of provider.

According to TFDA's FAQ, the assessor can be on the staff of the Taiwanese business itself, at the original manufacturer, at the contract manufacturer or at a third party. A safety assessment already signed by an overseas assessor who meets Taiwan's conditions does not need a second signature in Taiwan. The Taiwanese business named on the label still has to review what the assessor signed, so the signature does not move responsibility away from it.

For a product already sold in the EU, the person who signed the EU safety report may or may not meet Taiwan's training conditions. Check that before assuming one signature covers both markets. The EU's notification, Product Information File and safety report follow a similar logic but different rules, as set out in our guide to CPNP notification for a Korean-made cosmetic.

Where Is a Taiwan PIF Kept, and for How Long?

The Taiwanese manufacturer or importer keeps the PIF at the address printed on the label and must be able to produce it when TFDA inspects. The file is kept for at least five years from the day after the product was last available on the market, on paper or electronically.

TFDA gives at least seven days' notice before inspecting a file, except in an emergency or where public interest requires otherwise. Its FAQ names the higher-risk groups (the phase 1 and phase 2 products above), products with reported adverse reactions and products under international alerts as the ones checked first. Where a file is incomplete, the business is first given a deadline to correct it, and penalties follow only if it is still not corrected.

The 2026 FAQ also answers a question about formula confidentiality. Where the original manufacturer or contract manufacturer has built the file, it may be stored electronically in that manufacturer's own system or cloud space. The condition is that the Taiwanese manufacturer or importer can produce or retrieve it when TFDA inspects. The duty and the inspection address stay in Taiwan; what moves is where the documents physically sit.

How Taiwan's GMP Rule Reaches a Korean Factory

Article 8 of the Act requires manufacturing sites for the announced product groups to comply with Taiwan's Cosmetics GMP Regulations and allows TFDA to inspect them on site. The same article extends the rule to foreign manufacturing sites. A Korean factory supplying Taiwan is therefore covered by the requirement itself, on the phase dates in the table above. The duty to comply sits with the site; the Taiwanese business named on the label records the site's evidence.

Taiwan's GMP Regulations were written with reference to ISO 22716, the international guideline for cosmetic good manufacturing practice. The evidence goes into two places: PIF item 5, and the GMP field in the product notification, which records each manufacturing site's name, address and nationality.

According to TFDA's FAQ, the evidence for an overseas site can take one of these forms:

EvidenceWhat it is
TFDA GMP certificateIssued by TFDA to a manufacturing site
ISO 22716 certificateIssued by a certification body
Declaration of conformityThe site declares that it complies with Taiwan's GMP Regulations
Home-country GMP evidenceWhere the site meets its own country's cosmetic GMP, supporting documents together with a declaration

Whichever form is used, TFDA expects the site name, the address and the certified scope (product type or dosage form) to be correct, the document to be in date, and the name and address to match the product notification. ISO 9001 and ISO 13485 are not substitutes, because their scope differs from ISO 22716. The FAQ does not say a Korean CGMP certificate is accepted on its own. It appears to fit the last row, as supporting evidence provided together with a declaration, but the FAQ does not name it, so confirm the form with your Taiwanese importer.

Two practical consequences follow. First, scope matters as much as the certificate. A certificate that covers one line or one dosage form does not cover a product run elsewhere, a point our guide to cosmetic certifications and their scope explains. Second, a declaration is not a lighter option. TFDA can inspect, can order corrections and can penalise, so a declaration has to be one the site can stand behind.

One more site can fall inside the rule. In a 2019 letter, TFDA treated a site in Taiwan that applies Chinese labels to imported cosmetics as doing packaging work, which brings it under the GMP schedule. TFDA's PIF FAQ adds that such a site has to appear in the PIF's site details.

Product Notification (登錄) in Brief

Product notification is the online filing, often called registration, that the Taiwanese manufacturer or importer completes before supply. It is self-declared rather than reviewed: TFDA states that the data are entered by the business and are not proof of any efficacy, safety or quality review. As of November 2026, the TFDA notification FAQ sets out these points:

  • Only Taiwanese businesses file. Accounts are opened under a Taiwanese company registration number, and overseas businesses cannot open one.
  • Each importer files separately. Two importers bringing in the same product each need their own notification.
  • A notification is valid for three years. It is extended within the three months before it expires. It is not an annual filing.
  • An ingredient change means a new notification. Other changes are made by amendment. Products that differ only in colourant or fragrance can be notified as one series, and a product sold in several sizes does not need separate notifications.
  • Each manufacturing site is notified separately. If the same product comes from more than one contract manufacturer, each site has its own notification.
  • Notification is a condition of sale, not of customs clearance. TFDA states that the platform has no bearing on whether the product clears customs.

The separate licence that specific-purpose cosmetics such as sunscreens once needed ceased to apply on 1 July 2024, so every cosmetic now takes the same route. Label content, including the rule that the full ingredient list may stay in English, is covered on the Taiwan market page and in our checklist of cosmetic labeling requirements by country.

What We Coordinate and What Stays With the Importer

  • We coordinate the manufacturing-side content within the project scope. With our partner manufacturer we assemble the formula disclosure, manufacturing method, test reports and site GMP evidence in the form the Taiwanese importer's PIF and notification ask for, as part of export documentation support from Korea.
  • We confirm the partner site's evidence and its scope. Seoul Coslab does not own production lines and holds no manufacturing certification of its own. We check the current certificate or declaration for the specific site and dosage form and share it, as described on our cosmetic quality control and testing page.
  • The notification and the PIF stay with the Taiwanese business. The Taiwanese manufacturer or importer files the notification and holds the file. A qualified assessor, in Taiwan or abroad, signs the safety assessment, and the Taiwanese business reviews what was signed. We do not file the notification or sign the assessment.
  • We do not promise a result or a timeline. TFDA decides what an inspection finds, and we are not your legal adviser.

For a sunscreen, which has been in phase 1 since 2024, the product side is covered in Korean sunscreen ODM, OEM and private label manufacturing. If Taiwan is one of several Asian markets, our explainer on ASEAN cosmetic notification sets out how a similar product information file works in Southeast Asia.

Frequently Asked Questions

Does a Taiwan PIF have to be submitted to TFDA?

No. The PIF is kept by the Taiwanese manufacturer or importer and produced when TFDA inspects it. Nothing is uploaded in advance, and TFDA does not approve or certify the file.

Can a Korean manufacturer hold the PIF or the product notification?

No. Both duties fall on the Taiwanese manufacturer or importer, and overseas businesses cannot open a notification account. A Korean manufacturer supplies much of the PIF's content, and TFDA's 2026 FAQ allows the file to be stored electronically in the manufacturer's own system, provided the Taiwanese business can produce it at inspection.

Does the PIF have to be in Traditional Chinese?

No. The PIF can be built in Chinese or English. Source documents in other languages, including Korean, need a Chinese or English translation. The product label is a separate matter and follows the labelling rules in Article 7 of the Act.

Does the Korean factory need ISO 22716 for Taiwan?

Not necessarily. TFDA accepts a TFDA GMP certificate, an ISO 22716 certificate from a certification body, a declaration of conformity with Taiwan's GMP Regulations, or home-country GMP evidence with a declaration. The document must be in date, its scope must cover the product's type or dosage form, and the site name and address must match the product notification.

Will TFDA inspect the Korean factory?

It can. The Act allows TFDA to inspect manufacturing sites, and the GMP rule applies to foreign sites as well, so the duty to comply sits with the Korean factory itself. In practice, the evidence is the certificate or declaration the Taiwanese business places in the PIF and the notification, and it needs to be accurate and current.

Can the safety assessor be based in Korea?

Yes. TFDA states that the assessor can be in Taiwan or abroad, provided they meet the education and training conditions in the PIF Regulations. There is no licence to obtain.

Sources
  1. Regulations for Cosmetic Product Information File Management (化粧品產品資訊檔案管理辦法) — Ministry of Justice, Taiwan (Laws & Regulations Database)
  2. Cosmetic Hygiene and Safety Act (化粧品衛生安全管理法) — Ministry of Justice, Taiwan (Laws & Regulations Database)
  3. Cosmetics Good Manufacturing Practice Regulations (化粧品優良製造準則) — Ministry of Justice, Taiwan (Laws & Regulations Database)
  4. Regulations Governing Notification of Cosmetic Products (化粧品產品登錄辦法) — Ministry of Justice, Taiwan (Laws & Regulations Database)
  5. Cosmetic Product Information Files (PIF) to Be Implemented in Phases Annually — Taiwan Food and Drug Administration
  6. Cosmetic categories whose manufacturing sites must comply with the Cosmetics GMP Regulations (衛授食字第1131103147號) — Ministry of Health and Welfare / Taiwan Food and Drug Administration
  7. TFDA letter on sites applying Chinese labels to imported cosmetics and GMP, 26 November 2019 (FDA品字第1081106522號) — Taiwan Food and Drug Administration
  8. Cosmetic Product Information File FAQ (化粧品產品資訊檔案常見問題Q&A), June 2026 edition — Taiwan Food and Drug Administration
  9. Cosmetic Product Notification FAQ (化粧品產品登錄常見問題Q&A), August 2026 edition — Taiwan Food and Drug Administration

This page is general information for manufacturing planning. It is not legal or regulatory advice, it has no legal effect, and no rights can be derived from it. Requirements change by market and over time — before acting on anything here, confirm the current position with the authority concerned or with qualified counsel.

Start Your Product Brief

Let’s Create
What’s Next in Beauty.

Start Your Product Brief →